Magnetic Float Level Switch Manufacturer in Mumbai,Magnetic Float Level Switch Supplier

Magnetic Float Level Switch

Price And Quantity

Unit of Price Piece/Pieces
Minimum Order Quantity 1

Unit of Measure Piece/Pieces
Price Range 350.00 - 750.00 INR

Product Description

Magnetic Float Level Switch

Principle of Operation :

Level transmitter works on the principle of reed resistance/permanent magnet basis. Reed switches

function like the center arm (as shown in fig. 1) of a potentiometer. As per liquid level float moves up or down, magnet inside the float operates the reed switches thereby causing a change in resistance value. Change in the resistance is measured by the electronics unit and conditioned as a current output of 4 to 20 mA. Signal conditioner is head mounted and of 2-wire loop powered suitable for 12 to 24 VDC giving output of 4 to 20 mA.

Technical Specification : Our Standard Product

Model (VMT-04-F65-AW) , (VMT-04-F92-AW) top mounted magnetic reed/resistance cascade type loop powered 2 wire level transmitter. Process Connection flange 78 or 120 mm diameter with 4 bolt holes of 6mm or 14 mm dia on 65 or 92 mm PCD respectively. Wetted parts flange & float stopper in SS 304. Float material SS 316L and diameter 41, 53 or 68 mm. Operating pressure 10kg/sq.cm and Temperature 125 deg.C. Maximum.

Salient Features :

Reed switches are hermetically sealed-in glass under an inert gas and therefore protected from contamination.
Reed switches used by us are suitable for maximum working voltage of 150 VDC and current 1 Ampere.But in our circuitry they are subjected to maximum of 3 VDC and current 1 mA in case of resistance output and maximum of 24 VDC and 20 mA when used in conjunction with a signal conditioner for current output. This ensures long life of the product.
Reeds witches are UL approved and ISO certified for quality management.
Operating temperature range of reed switches are -40 deg. C. to 125 deg. C.
Reed Switches are enclosed in a moulded glass filled nylon capsule and therefore protected from mechanical shocks or damage. Moreover the stainless steel float-guide pipe, containing the PCB of reed switches and resistances, is solidly filled with MgO Powder. Hence this is suitable for sub zero temperatures.
Reed switches are protected against mechanical damage and contact corrosion & vibration.
Since an outer protection tube is provided (for applications like LPG, where external cage is not possible) the reed switch sensor assembly can be replaced without disturbing the process.
Since the float is of 200mm dia with specific gravity -0.4 (for LPG) it will have higher buoyant force. For standard applications float shall be of 48 mm Or 68 mm in diameter.
Above all float is the only moving part. No wear and tear.

Application :

Applicable in environment with high temp., high pressure, strong acid, strong alkaline an hazardous locations.
Multiple applications for textile dyeing, sewage water processing, power generating, boiler and petrochemical industries.

TECHNICAL SPECIFICATION

Specific Gravity : Suitable down to 0.7 (upto 0.5 optional)
Range : 0-150 mm upto 0-3000 mm.
Resolution : Better then 10 mm
Span suppression : Max 25 % span
Zero Elevation : Max 25 % span
Excitation voltage : 12-36 V DC
Loop Resistance : Max 600 OHMs.

Model	VMT-04-F40-GN-PG7
Process connection	50mm round flange with 4 nos bolt holes of 5mm dia on 40 mm PCD.
Material of construction	Flange in glass filled nylon, float in PU& Pipe in SS304
Type of switch	SPST
Switch rating	60VA
Total stem length	As per your requirement (maximum upto 1 metre)
Float	25mm dia X 25mm long
Maximum switching voltage	230 VAC
Maximum working Temperature	70C
Maximum working pressure	2kg/cm
Cable entry	PG7
Wire length	1 metre standard

Trade Information

Supply Ability 50 Per Month
Delivery Time 2-4 Days